How to Remove Stickers from a Laptop? Step By Step Guide 2022

Removing stubborn stickers does not require you to learn rocket science. You could begin by scraping them away with your fingernail or a sharp tool that does not pose harm to your laptop’s body. When they are removed, you use various products such as rubbing alcohol or an abrasive piece of cloth to remove sticker residue. However, if the adhesive residue is too strong, there are other ways at your disposal. 

How To Remove Stickers From A Laptop – 3 Steps

Here you get the step-by-step guide that you can follow to easily remove paper stickers from a laptop.

YouTube video

Step 1: Remove The Stickers By Scrapping 

If your laptop’s relatively new–meaning it’s been only a year under your use–scraping off stickers is not hard at all. 

Here’s how to do it:

  • Take a plastic knife, use your fingernail or any other slightly sharp tool. 
  • You could even use your credit card.
  • Start from one corner of the sticker. 
  • Gently and mildly scrap from the corner. Do not rush it at all. 
  • Once a little portion has been removed, follow through the sticker’s length to remove it completely. 
  • Be sure not to harm the color of your laptop. 
  • Always peel off the sticker right from its contact with the laptop. 

As you slowly work your way through the sticker, you’d feel that it’s easy to remove it. That’s because it hasn’t aged enough to leave that sticky residue that takes quite some effort to remove. 

Whether the residue is new or old, follow the next steps to remove it perfectly.

Step 2: Remove The Residue 

There are many ways in which you can remove the glue residue left to have a brand new laptop surface that was locked away beneath the sticker. 

1. Turn Off Your PC 

Since you’d be using some liquid substances to remove stubborn residue, it’s always wise enough to turn off your laptop. You have to save yourself from any undue shocks or battery damage. If possible, remove the battery altogether to stay away from any unwarranted events. 

2. Use Lint-Free Cloth 

We’re going to start with the modest of the ways available. Grab a lint-free microfiber cloth and soak it in some hot water. Wring it to the point that all the water is removed but the cloth is damp enough. Afterward, in circular motions, rub the area of the sticker until you feel the gunk has been removed. You may want to apply a little pressure at this point and even change your rubbing motion to completely get rid of the residue. 

3. Use Dishwasher Soap If Need Be 

Even after using the damp microfiber cloth, you feel there’s some residue left, you can use a droplet of dishwasher soap to get things done. Make sure, however, to not overuse the detergent as it will cause problems. 

Sometimes, even after rubbing the place, you may feel as if the dishwasher soap has been left. You might have to use water at that point. You may also want to avoid pouring any cleaning agent directly onto the laptop. Also, be sure not to apply too much water to the cloth as it may put the innards of your laptop to risk. After you’re done with removing the gunk with dishwasher soap, use a dry cloth to complete the cleaning

Step 3: Dealing With Stubborn Residue 

You may be asking “how to remove stickers from a laptop and their stubborn residue?” when the remaining residue is still there even after following the steps above. Worry not, however, as there is still hope. Use the following methods to get rid of it without breaking your bank or the laptop. 

1. Use Rubbing Alcohol 

Rubbing alcohol is readily available in the stores near you. You may even have it in your house. 

  • Take a small amount in a bowl. 
  • Use a microfiber cloth and dip one corner of it in the bowl. 
  • Wring it well to remove any excess alcohol. 
  • Place the corner on the residue and leave it for a few minutes. 
  • Recheck the place after every minute to see if the alcohol isn’t decolorizing your laptop. 
  • If it is doing that, stop immediately. 
  • If not, keep the cloth until the residue starts coming off. 

2. Use 1-1 Mixture of White Vinegar

Alternatively, you could use white vinegar if you don’t have access to rubbing alcohol. 

  • Mix one portion of the vinegar with an equal portion of water. 
  • Dip the cloth in the mixture and wring it well afterward.
  • Place the cloth on the residue and let it stay for a few minutes. 
  • Recheck after a minute or so to see if everything is well. 
  • Gently rub the area after two minutes.
  • Use a dry cloth to remove the solution from the area once you’re done. 

3. Abrasive Cloth or Sponge 

Still have not had luck with the alcohol or the vinegar solution? Try using an abrasive material such as a soft cloth or a sponge. 

  • Make sure the cloth isn’t too harsh as it will damage the laptop. 
  • Apply slight pressure on the sponge or clean wet cloth when you’re rubbing it on the area. 
  • You can use water or even a droplet of dishwasher soap to get rid of the gunk.

4. Use A Strong Tape 

As a second last resort, you could use strong duct tape to remove the residue. 

  • Undo a small portion of the tape and stick it to the place of the former sticker. 
  • Apply small pressure to completely stick the tape to the area. 
  • Leave it for a few minutes.
  • Remove the sticker abruptly to do away with the residue. 
  • Use rubbing alcohol or vinegar solution afterward to complete the process. 

5. Use A Heat Gun or Hair Drye

A heat gun and a hairdryer work the same way – they use heat to melt the sticking of a sticker. That way, it’s easy to get rid of it. 

  • Turn on the heat gun or the hairdryer on the lowest settings. 
  • Hold it right on the top of the sticker and run it for about half a minute. 
  • Now try scraping off the sticker or the residue with your fingernail. 
  • You could use the methods explained above to remove the final residue after it is slightly melted or loosened away. 

How to Remove Stickers From Laptop – Conclusion 

Removing stickers from a laptop is not the end. You also have to deal with the sticky residue afterward. To do that, first, scrape off the sticker with the help of a blunt tool or your fingernail, then use a damp cloth, rubbing alcohol, vinegar solution, or heat guns/hair dryers to remove the gunk left. Follow the solutions in the order of the hardness of the residue.